Adjustable Torque Screwdrivers
The S/R CAL-Series Adjustable Torque Screwdrivers are
ideal for any application where:
- High repeatability for low torque is
needed.
- Excellent durability and versatility
are needed.
These needs are common in high-precision operations such
as electronics and electro-mechanical repair.
- Bi-directional Accuracy of +/- 6%
Indicated Value from 20% to 100% of capacity meets or exceeds
ASME B107.300-2010 and ISO 6789.
- Incredibly durable; many owners have
experienced a service life of 10+ years!
- Operator cannot overtorque. Clutch
releases automatically when desired torque has been achieved.
- Scale on shaft is marked in dual
incrementation (in. lbs. and NM) on Cal 36/4, kgf•cm on CAL 40.
- Magnifying lens improves view of
clearly engraved scale.
- To operatie, simply dial torque setting
and insert bit.
- Uses standard bits, adapters and
sockets.
- Anti-backlash design enhances
repeatability.
- Comes with FREE certificate of
calibration from our ISO/IEC 17025 Accredited Calibration
Laboratory. CAL 36/4 can be ordered with certification for
English or SI units of measure.
|
Part No. |
Model |
Range |
Graduation |
Length |
Weight |
Drive |
|
810587* |
CAL 36/4 |
2-36 in.
lbs./.2-4 Nm |
2 in. lbs./.2 Nm |
7.8 in. |
0.5 lbs. |
1/4” F Hex |
|
|
|
|
|
|
|
|
|
* For calibration in SI unit of measure, use part number
810017.
Prints
810587
Instructions
857176
Welcome to Sturtevant
Richmont
BACK
